Step-By-Step Guide For the Sigelei Chronus Shikra 200W Kit

The Sigelei Chronus Shikra 200W Kit is one of the most advanced vaping systems on the market today. By following this guide, you'll be able to enjoy its many exciting features in no time. 

Step #1: Remove your Sigelei Chronus Shikra 200W Box Mod and Chronus Sub-Ohm Tank from the box. Then, locate the MS Coil in the box and place it aside. Take out the USB cable and place it where you change your vape batteries. Note: It's important that you keep the remaining parts inside the box and put the box somewhere safe. The kit comes with many spare parts that may be useful at a later time. 

Step #2: Locate the battery compartment that's on the base of the Chronus Shikra. Into the compartment, insert two fully charged 18650 batteries. 

Step #3: Pick up your Chronus Sub-Ohm Tank. The tank has a removable glass piece that gives it a capacity 2mL. If you wish, you can switch out this glass piece for the bubble glass piece that's in the box. This will increase your vape juice capacity to 5.5mL. 

Step #4: Remove the top from the tank. Then, insert your vape juice into the tank, being careful not to exceed the maximum fill line. 

Step #5: Prime your MS Coil. Do this by saturating the wick with vape juice. Allow the coil to sit for five minutes before installing it into the tank. This will ensure that the vape juice has fully saturated the wick. Then, return the top to the tank. 

Step #6: Screw the tank into the box mod. Then, turn the device's power on using the power button. The display screen on the mod's chassis should light up. 

Step #7: Use the navigation buttons and the display screen to select your settings. The device is known for having many different output modes and customizable settings. 

Final Step: Use the firing button to take a pull. Adjust the tank's airflow ring as needed.

This guide will help you get the most satisfaction out of your Sigelei Chronus Shikra 200W Kit.